Ktag Firmware 7.020 Read Opel Insignia EDC17C59 ECU


Ktag Firmware 7.020 Introduction:

Model name:Ktag 7.020
Software Version:2.23
Update:By link
Car Models:For trucks ,heavy duty,boat…
Functions:Ecu Programmer
Connection:By OBD2.
Computer requirements:XP/WIN7/WIN8/WIN10

This is how to use Ktag V7.020 firmware master version ecu programming tool to read,EDC17C59 ECU from 2013 Opel Insignia, including EDC17C59 and ktag ksuite cable connection/pinouts.

Here you go.

Ktag fw 7.020 clone is working with EDC17C59 ECU


Select the model


Ktag v7.020 master clone warnings, notice, recommendation, instructions


EDC17C59 connection instructions


Direct connection


EDC17C59 and cable pinouts

Pin 5, 46 — red— +12v

Pin 2 — black — ground

Pin 66 — white — CAN-H

Pin 65 — green — CAN-L

Wire soldered to the two pins —- gray with alligator clip — BOOT

Soldered wired — blue with alligator clip — CAF1


Select the plug-in you need


Ktag firmware V7.020 is reading EDC17C5919


EDC17C59 ECU reading successfully





24hour Online Customer Service:





No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *