How to use SKP1000 Program Suzuki S-Cross Key


SKP1000 tablet auto key programmer Program Suzuki S-Cross Key user manual form

SKP1000 Tablet key programmer car list, software/firmware update

Suzuki Key information:

Original key: 3-button smart key

Chip type: 46 chip

Frequency: 315MHz

Pin code: required

Device to program: SKP 1000 tablet auto key programmer

How to Use SKP1000 SKP 1000 Tablet Auto Key Programmer


Step 1.Get Pin Code

To get pin code, you need ID code and VIN.

To read ID code, you need to switch ignition to turn on the dashboard. But all keys have lost, so cannot turn on dash.

Here’s a way:

Connect IG1 SIG 7.5A on the immo box (located on the left of the driver side) to a 12V power supply to enable/force dash indicators turn on


2017 New Introducted Powerful Auto Key Programmer

You can read ID code when dash lights turn on

Used SKP1000 key programmer to program

Check out 8-digit pin code according to ID code and VIN

Step 2: Program Key

Follow SKP1000 prompt to enter pin code program

All keys will be deleted, press YES to continue programming

How to Use SKP1000 programs

Stick smart key to Start button but not start engine

Original SKP1000 Auto Key Programmer

(If start the engine, dash indicator will go off. In this case, you can follow method above to power it on again)

Program key success.

How to use SKP1000 car key programmer to program

Newest 2017 SKP1000 Tablet Key pro claims to replace Superobd SKP900



Website :


No Comments

Comments are closed.