0
How to use JLink V8 ARM USB JTAG Adapter Emulator
Auto Diagnostic Tool / 17/07/2017

JLink v8 ARM Features: 1. IAR EWARM integrated development environment seamlessly connected JTAG Emulator 2. Support all ARM7/ARM9 core chips, as well as cortex M3, including Thumb mode 3. Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment 4. Download speeds of up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s 5. The maximum JTAG speed 12 MHz 6. Target board voltage range 1.2V-3.3V, 5V compatible 7. Auto speed recognition 8. Monitoring all JTAG signals and target board voltage Fully plug and play 9. Use the USB power supply (but not the target board power supply) 10. With a USB cable and 20-core flat cable 11. Support multi-device JTAG serial connection 12. Standard 20-core JTAG emulation connector 13. Optional 14-core JTAG emulation connector 14. Optional adapter for 5V targets board J-Link v8 Support for ARM Xores: ARM7TDMI (Rev 1) ARM7TDMI (Rev 3) ARM7TDMI-S (Rev 4) ARM720T * ARM920T ARM926EJ-S ARM946E-S ARM966E-S ARM11 Cortex-M3 Product Specifications USB power supply, the whole current <50mA USB Interface USB 2.0 full speed 12Mbps Target board interfaces JTAG (20P) J-Link and target board serial data transfer speed between the 12MHz maximum…

0
How to use J-Link V8 ARM USB JTAG Adapter Emulator And Kess KTAG NXP Chip
Auto Diagnostic Tool , OBD2 Code Scanner / 20/06/2017

J-Link V8 ARM USB JTAG Adapter Emulator And Kess KTAG NXP Chips For 60 Tokens 1. J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades; 2. J-Link V8 improves the SWD interface, an increase of driver chips, (V6 and V7 in the SWD is a direct quote from the pin to the target CPU board); 3. J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway V8`s SWD velocities slower than the V7 4. J-Link V8 have three lights, one directed USB Communications, a direct target CPU, reset state, a direct 5V output is turned on V7 only 1 USB communication indicator 5. J-Link V8`s firmware update process is not DLL, and can not write the same as V7 Bootloader on a simple easy to crack V8`s Bootloader need to implement USB device connectivity; J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.With the IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment supports all ARM7/ARM9 core chip simulationThrough RDI interface and the integrated development environment for seamless connectivity, easy, convenient connections…