Questions quotated from forum “when PCM reprogramming,i met Ford VCM2 IDS Error Code:11.0×0 851082,what’s wrong ? Any effective solutions ? Thanks for your help. “ Well,this error usually resulted from the operation cannot begin because the PCM failed to complete a service procedure. You can Perform PMI on the PCM to resolve the issue this questions.And following are several workable methods that have been tested by forum members,i made a summary and post here for sharing Solution 1 : Turn off your firewall . You should close the internet, anti-virus software before using. Solution 2 : Uninstall fmp and reinstall it, Use 32 bit processor,because fmp would not work correctly with 64. Solution 3 : If you are checking PCM for up-dates, Ford will advise on 6.0L powertrain if there is a reflash avail for TCM, FICM or PCM, if it states there is no update then all three modules are at latest level, no action required, I am aware it states to remove FICM relay prior to reflash FICM, this is a carryover note from when we used PDS or WDS to reflash the FICM, if you are using IDS with VMM interface its not required to remove the…