Toyota Techstream 12.20.024 Software updated

Newest Toyota Techstream V12.20.024 is tested without issues on Windows 7 operation system and verified to work well with MINI VCI Cable For TIS Techstream (SV46,SV46-B),Mangoose VCI (SV46-C) and VXDiag VCX NANO For Toyota,See the tested report below

According to the teste reported,with Toyota Techstream cables (Mini vci or Mangoose vci), you can customize your car;With VXDiag vcx nano Toyota, you can not only have customization but do programming via WIFI.

Free Toyota Techstream 12.20.024 Download Link : https://mega.nz/#!9NBllR4R!v1hY8XHTcT-RBJfQypQ5zIDLypBDJ12LHy6zDqdNOFA

Shared by : http://www.autocardiag.com/

How to install Techstream software 12.20.024 Windows 7 :

Step 1 : Install the program,,open Techstream 12.209.024 disk F ,copy all files to another new folder on Desktop,then open Techstream 12.20.024 setup application,choose a setup language for installation

Step 2 : Preparing setup,next to install Techstream software,accept the agreement,enter the user name and company name,then next,begin Techstream 12.20.024 installation,installing Techstream 12.20.024,successfully installed Techstream.

Step 3 : Replace the MainMenu.exe,Run MVCI driver for TOYOTA TIS SETUP,then install MVCI driver

Step 4 : Follow the system guide to finish installation,then use this key to register Techstream, run Techstream application on Desktop,click “yes” to continue,then close the internet explorer, then you will enter Toyota Techstream Interface like following pix show

Step 5 :Registered Techstream Software 12.20.024,it’s Techstream crack version,use key (attached to the instructions.txt) to register,then click “Ok”,exit Techstream

Step 6 : Check MVCI FW Version, run MVCI firmware update tool on Desktop device info

Step 7 : Run Techstream 12.20.024 on Desktop,click “yes” to continue,then close the internet explorer,then the installation success !